E-Lab 6.1.3 - Configuring Static Routes
In this lab examine how to configure static routes.
The routes in this lab allow the routers on the topology to communicate with each other.
Step 1
Enter into privileged EXEC mode.
Step 2
Now enter into global configuration mode.
Step 3
You are on the router Santo Domingo, create a route to send all traffic heading to the network 172.16.1.0/24 to the next hop address at 172.16.2.1.
Step 4
Now create a route to send all traffic heading to the network 172.16.5.0/24 to the next hop address at 172.16.4.2.
Now the router Santo Domingo can send traffic to the networks 172.16.1.0 and 172.16.5.0.
Step 5
Exit into privileged EXEC mode.
Step 6
Save the current configuration to memory.
Use the copy running-config startup-config or write memory commands.