E-Lab 5.1.3 - Preparing for Boot System Commands
This lab will display information relating to the router boot procedure using the appropriate show commands.
Step 1
Enter privileged EXEC mode.
Step 2
Enter into global configuration mode.
Step 3
Specify the system file image from flash using the boot command.
Step 4
Exit into privileged EXEC mode.
Step 5
Save the current configuration.
Step 6
Enter the command to display the current configuration.
Step 7
Show information about the backup configuration file.
Step 8
Display the IOS version and related information.
Step 9
Display the status of the flash memory.