E-Lab 11.2.2d - Extended ACL
Configure an extended access list for the local router Kuwait.
Step 1
Activate privileged EXEC mode.
Step 2
Enter global configuration mode.
Step 3.1
A CCNA student suggests an access-list on serial 0 outbound.
Create an extended access-list, 101, that denies tcp traffic to the 192.168.13.0 network from hosts on the 192.168.12.0 network.
Step 3.2
Add a line to the access list so that any other traffic can pass through the interface.
Step 4
Now enter interface configuration mode for Serial 0/0 to apply the access list.
Step 5
Apply access-list 101 to the serial interface such that filtering occurs on outbound traffic.
Step 6
Type end to exit the configuration session.
Step 7
Type show access-lists to view the access-list that was created.
Step 8
View the ip interface information for serial 0/0 to verify that the list is being applied.
Where would be a better place to put this access-list?
Write out the appropriate IOS command.